Lost Vape THELEMA SOLO 100W kit review
Case material: zinc plastic eco-leather pseudo-carbon Protection: low/high resistance, overheating, – warranty card Straight to the downside. The only nitpick is that, as in most Chinese mods, at the moment the Fire button is pressed five times to turn off the mod, a voltage pulse is applied (the device fries), but this is inherent in most, and in the end it is a budget device. Review published in accordance with clause 18 of the Rules Diameter: 25.8mm at the base; 27.6mm at maximum thickness -Squeaky and fine thread POD tank When first inspecting the tank out of the box, traces of oil were found on the base of the base. — Convenient control. The overall dimensions are compact, but the mod is a bit tall. Color : black or steel
The mod is powered by the Quest 2.0 Chip. Color: here I would like to dwell in more detail – the box mod is made in 4 main color options, however, the manufacturer claims 8 options. The device is already being sold on the Russian market with might and main. The battery compartment cover is attached with magnets, however, there is a slight play in the cover, but if you bend the edges a little, then the play disappears (although if you pull the cover up / down with force, you can still feel the play).
The buttons do not rattle during operation, but you can hear the sounds if you wish. — Play of the battery cover. If you look closely, you can see glue sticking out at the joints of the carbon linings. The appearance of the connector platform is standard for the company. Connector type: steel 510, spring-loaded pin
Overview I would like to start (and quickly finish) with a complete UB Pro POD Tank on maintenance-free coils. In today’s case, everything is exactly the opposite – both cheap and cheerful. The appearance is already familiar to us from the Thelema Quest 200w mod (Although if you look at the box mods of Therion, Paranormal, Centaurus series, you can recognize common features in all of them). Resistance: 0.15 – 5.0Ω In use, the tank is noisy, the taste gives a standard for this type of non-service. Managing the board in the first place seems unusual, but it is worth working with me for 2-3 minutes, and you get used to the boxing mod very quickly. Micro-USB port/charging: Type-C, charging current 1.65 A Pros Screen/diagonal: color, 0.96 inches Height: 47.5mm with drip tip Working with the mod is a pleasure, everything can be easily found and configured without any key combinations.
The display is colorful, bright, with various color options and the ability to adjust the brightness. The box mod is equipped with a Type-C input, with the ability to quickly charge. -Ability to use 21700/18650 batteries; Review Lost Vape THELEMA SOLO 100W kit. Weight: 38.8g Meet Thelema Solo 100w. Today we will talk about a device that is a continuation of the “folk” Thelema line of the Lost Vape brand. It lies very nicely in the hand, but the copy is not light, while solidity is felt. Weight: 150 g. Drip type 810 is removable, on orings (at least thanks for that). – Type-C cable Dimensions: 97.5 x 39 x 28.5 mm. Power: 1 battery 18650 / 20700 / 21700 Given the difference in price between a kit kit and a pure box mod in the region of $ 8-10 (in other words, the cost of the equivalent cost of evaporators), you can take it, it’s pointless to go higher. – 18650 battery adapter Connector: 510 Coil resistance: UB Pro Coils 0.15Ω / 0.3Ω – replaceable coils 2 pcs, resistance 0.15Ω / 0.3Ω comfortable, but the rubber strap of the gas station collects dust very strongly. – user manual (for box mod and tank) Operating modes: VW, TC (NI200, SS, TI), VV, BYPASS, VPC, Boost (Soft / – Thelema Solo 100W mod Material: stainless steel plastic Let’s move on to the boxing mod. Chip: Quest 2.0 Cons The thread is very small, and you get into it not immediately. Of course, the device has minor flaws, but at the expense of the price you can forgive. When untwisted, the tank made a very unpleasant creak, and the sounds were no better on reassembly. The coating is tactilely pleasant, not slippery, gives the impression that it will be durable. Temperature range: 200℉ – 600℉ / 100℃ – 315℃ Everything is also excellent at work, no over/under power was detected, no missfires were noticed, the resistance does not dance (by the way, the minimum resistance is 0.15 ohm, modest for 2022), it starts without delay. Looks unpleasant. Some technical characteristics: Output power: 5 – 100W
A starter kit came to me for review, consisting of a mod and a tank. – UB Pro POD Tank The air intake is adjustable. Capacity: 5ml Options below: Evaporators are made on a fashionable grid today, designed for free puffing and high power. -Fit diameter 26 mm; The options differ in battery cover overlays: eco-leather or pseudo-carbon; as well as side panels: pseudo-carbon, glossy plastic and plastic with wood imitation. There is no overcharging of the battery.
The kit consists of: – spare oringi -Good work of the control chipset Pressing the buttons is tactilely pleasant. You also need to say something about the tank, but it probably doesn’t make sense, buy a better serviced atomizer. The pin does not look like the others, it is, as it were, recessed into the base of the base (the connector pin of the mod, by the way, also looks very specific). Voltage range: 0.7 – 8.0V -Noisy POD tank —Protruding adhesive on decorative elements There is enough information on the screen. -Fast charging; Modes in fashion all
the most common, in addition, it is possible to save your presets. Speaking of price, sourcemore.com is offering the device for $33.99 (with promo code SOLOK) I remember the last time I used Lost Vape products in 2018, it was the Paranormal 166 box mod, which, given the high cost, left a poor impression in terms of workmanship (there were problems with the battery compartment, jumping resistance). The case when the device should become popular. The product was provided for writing a review by the store. Current: up to 35A Drip tip: 810, detachable (on orings) I am an opponent of these decisions and call such tanks “disposable”, well, they look very cheap and give the impression of a consumable. The connector area is quite spacious, tanks up to 26 mm sit perfectly. Conclusion: The tank kit consists of a steel base and a plastic tank for refilling. We have no problems installing the evaporator.